Dell Dimension 8400 Series Скачать руководство пользователя

Страница: 16 / 148

Setting Up and Using Your Computer

www

.dell.com | support.dell.com

A CD player includes the following basic buttons:

A DVD player includes the following basic buttons:

For more information on playing CDs or DVDs, click

Help

on the CD or DVD player (if available).

Play.

Move backward within the current track.

Pause.

Move forward within the current track.

Stop.

Go to the previous track.

Eject.

Go to the next track.

Stop.

Restart the current chapter.

Play.

Fast forward.

Pause.

Fast reverse.

Advance a single frame while in pause mode.

Go to the next title or chapter.

Continuously play the current title or chapter.

Go to the previous title or chapter.

Eject.

Содержание Dimension 8400 Series





















































































































































Результаты поиска

Содержание Dimension 8400 Series

Отзывы:

Похожие инструкции для Dimension 8400 Series

Бренды по названию

Популярные бренды

Dell Dimension 8400 Series, Руководство пользователя

Результаты поиска

Содержание Dimension 8400 Series

Отзывы:

Похожие инструкции для Dimension 8400 Series

Бренды по названию

Популярные бренды