Dell Dimension 8250 Series Скачать руководство пользователя страница 117

Страница: 117 / 156

Appendix

117

Disconnect the computer power cable from the wall outlet, and then

press the power button to ground the system board.

Open the computer cover (see page 84).

Locate jumper PSWD on the system board (see page 87) and remove

the jumper plug.

Close the computer cover (see page 107), plug your computer into an

electrical outlet, and turn on the computer.
The existing password(s) will be erased.

Shut down the computer (see page 33).

NOTICE:

To disconnect a network cable, first unplug the cable from your

computer, and then unplug it from the network wall jack.

Turn off any attached devices and disconnect them from their

electrical outlets.

Disconnect the computer power cable from the wall outlet, and then

press the power button to ground the system board.

Open the computer cover (see page 84).

Reconnect the jumper plug to jumper PSWD (see page 87).

Close the computer cover (see page 107).

NOTICE:

To connect a network cable, first plug the cable into the network

wall jack, and then plug it into the computer.

Connect your computer and devices to electrical outlets, and turn

them on.
Turning on your computer with the PSWD jumper installed reenables

the password feature.

Replacing the Battery

CAUTION: Before you begin this procedure, follow the steps in

"When Working Inside Your Computer" on page 12.

A coin-cell battery maintains computer configuration, date, and time
information. The battery can last several years.

If you have to repeatedly reset time and date information after turning on
the computer, replace the battery.

Содержание Dimension 8250 Series





























































































































































Результаты поиска

Содержание Dimension 8250 Series

Отзывы:

Бренды по названию

Популярные бренды

Dell Dimension 8250 Series, Руководство пользователя

Результаты поиска

Содержание Dimension 8250 Series

Отзывы:

Бренды по названию

Популярные бренды