20
S y s t e m I n f o r m a t i o n G u i d e
www
.dell.com | support.dell.com
Bottom View
Removing a Battery
For more information about removing the second battery, see "Using the Module Bay" in
your online
User’s Guide
.
CAUTION: Before performing these procedures, turn off the computer,
disconnect it from the electrical outlet, and disconnect the modem from the
telephone wall jack.
NOTICE:
If you choose to replace the battery with the computer in standby mode, you have up
to 90 seconds to complete the battery replacement before the computer shuts down and loses any
unsaved data.
1
Ensure that the computer is turned off, suspended in a power management mode, or
connected to an electrical outlet.
2
If the computer is connected to a docking device (docked), undock it.
See the documentation that came with your docking device for instructions.
hard drive
docking device slot
Mini PCI
card/modem cover
battery
battery-bay latch release
battery charge gauge
memory module cover
fan
H0522bk0.book Page 20 Tuesday, February 11, 2003 12:23 PM