Dell D14U Скачать руководство пользователя страница 61

Страница: 61 / 69

Maintenance

Table 15. Maintenance

Option

Description

Service Tag

Displays the service tag of your computer.

Asset Tag

Allows you to create a system asset tag if an asset tag is not already set.

This option is not set by default.

SERR Messages

Controls the SERR message mechanism. This option is set by default. Some graphics cards
require that the SERR message mechanism be disabled.

BIOS Downgrade

Allows you to flash previous revisions of the system firmware.

●

Allow BIOS Downgrade

This option is set by default.

Data Wipe

Allows you to securely erase data from all internal storage devices.

●

Wipe on Next Boot

This option is not set by default.

BIOS Recovery

BIOS Recovery from Hard Drive

—This option is set by default. Allows you to recover the

corrupted BIOS from a recovery file on the HDD or an external USB key.

NOTE:

BIOS Recovery from Hard Drive

field must be enabled.

Always Perform Integrity Check

—Performs integrity check on every boot.

First Power On Date

Allows you the set Ownership date. The option

Set Ownership Date

is not set by default.

System logs

Table 16. System Logs

Option

Description

BIOS events

Allows you to view and clear the System Setup (BIOS) POST events.

Advanced configuration

Table 17. Advanced configuration

Option

Description

ASPM

Allows you to set the ASPM level.

●

Auto (default) - There is handshaking between the device and PCI Express hub to
determine the best ASPM mode supported by the device

●

Disabled - ASPM power management is turned off at all time

●

L1 Only - ASPM power management is set to use L1

BIOS setup

Содержание D14U






































































Результаты поиска

Содержание D14U

Отзывы:

Похожие инструкции для D14U

Бренды по названию

Популярные бренды

Dell D14U, Руководство по обслуживанию

Результаты поиска

Содержание D14U

Отзывы:

Похожие инструкции для D14U

Бренды по названию

Популярные бренды