Dell C9000 series, Справочное руководство

Страница: 367 / 2286

match route-type — redistributes routes that match a route type.
match tag — redistributes routes that match a specific tag.
match ip next-hop
To match based on the next-hop IP addresses specified in an IP access list or IP prefix list, configure a filter.
C9000 Series
Syntax
match ip next-hop {prefix-list prefix-list-name }
To delete a match, use the
no match ip next-hop {prefix-list prefix-
list-name }
command.
Parameters
prefix-list prefix-
list-name
Enter the keywords
prefix-list
and then enter the name of
configured prefix list, up to 140 characters.
Defaults Not configured.
Command Modes ROUTE-MAP
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Increased the name string to accept up to 140 characters. Prior
to 7.8.1.0, names are up to 16 characters long.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Related
Commands
match interface — redistributes routes that match the next-hop interface.
Access Control Lists (ACL) 367