Dell C9000 series, Справочное руководство

Страница: 371 / 2286

Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking TOS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
6.1.1.0 Introduced on the E-Series.
match route-type
To match routes based on the how the route is defined, configure a filter.
C9000 Series
Syntax
match route-type {external [type-1 | type-2] | internal | level-1
| level-2 | local}
To delete a match, use the
no match route-type {local | internal |
external [type-1 | type-2] | level-1 | level-2}
command.
Parameters
external [type-1|
type-2] Enter the keyword
external
then either type-1 or type-2 to
match only on OSPF Type 1 routes or OSPF Type 2 routes.
internal Enter the keyword
internal
to match only on routes
generated within OSPF areas.
level-1 Enter the keyword
level-1
to match IS-IS Level 1 routes.
level-2 Enter the keyword
level-2
to match IS-IS Level 2 routes.
local Enter the keyword
local
to match only on routes generated
within the switch.
Defaults Not configured.
Command Modes ROUTE-MAP
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
Access Control Lists (ACL) 371