Steps
1. Connect the power-adapter port cable to the system board.
2. Slide the power-adapter port at an angle into the slot on the palm-rest and keyboard assembly and adhere the power-
adapter port cable to the system board.
3. Adhere the tapes that secure the power-adapter port cable to the system board.
4. Place the power-adapter port bracket on the palm-rest and keyboard assembly.
5. Align the screw holes on the power-adapter port bracket to the screw holes on the palm-rest and keyboard assembly.
6. Replace the two screws (M2.5x5) that secure the power-adapter port bracket to the palm-rest and keyboard assembly.
7. Replace the screw (M2x3) that secures the power-adapter port bracket to the palm-rest and keyboard assembly.
Next steps
1. Install the
2. Install the
.
After working inside your computer
.
Headset port
Removing the headset port
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
About this task
The following image(s) indicate the location of the headset port and provides a visual representation of the removal procedure.
32
Removing and installing components
Содержание Alienware x17 R1
