32
Memory Module(s)
2
Slide the memory module firmly into the connector at a 45-degree angle,
and then press the memory module down until it clicks into place.
If you do not hear the click, remove the memory module and reinstall it.
NOTE:
Your computer may not boot if the memory module is not installed properly.
3
Slide the tabs on the memory-module cover into the slots on the
computer base and lower the memory-module cover into place.
4
Tighten the captive screws that secure the memory-module cover to the
computer base.
Postrequisites
1
Replace the battery. See "Replacing the Battery" on page 18.
2
Replace the base cover. See "Replacing the Base Cover" on page 16.
3
Follow the instructions in "After Working Inside Your Computer" on page13.
1
memory-module connector
2 tab
3
notch
4 memory module
1
2
3
4
Содержание Alienware M14x R2
