Dell Alienware Aurora R8 Скачать руководство пользователя страница 105

Страница: 105 / 113

Table 4. System setup options—Advanced menu

Advanced

Advanced BIOS Features

Intel SpeedStep

Allows you to enable or disable Intel Speedstep Technology.

Default: Enabled.

NOTE: If enabled, the processor clock speed and core

voltage are adjusted dynamically based on the

processor load.

Virtualization

Allows you to enable or disable Intel Virtualization Technology

feature for the processor.

VT for Direct I/O

Allows you to enable or disable Intel Virtualization Technology

feature for the Direct I/O.

SATA Operation

Allows you to configure the operating mode of the integrated

SATA hard drive controller.

Intel Ready Mode Technology

Allows you to enable or disable the Intel Ready Mode

Technology.

Intel Software Guard Extensions

Allows you to enable or disable Intel Software Guard

Extensions.

BIOS Recovery from Hard Drive

Allows you to enable or disable BIOS Recovery from hard

drive.

USB Configuration

Front USB Ports

Allows you to enable or disable the front USB ports.

Rear USB Ports

Allows you to enable or disable the rear USB ports.

Power Options

Numlock Key

Allows you to set the status of the Num Lock key during boot

to On or Off.

Wake Up by Integrated LAN

Allow the computer to be powered on by special LAN signals.

AC Recovery

Sets what action the computer takes when power is restored.

Deep Sleep Control

Allows you to define the controls when Deep Sleep is

enabled.

USB Wake Support (S3)

Allows you to enable the USB devices to wake the system from

Standby.

USB PowerShare (S4/S5)

Allows you to charge external devices.

USB PowerShare Wake Support (S4/S5)

Allows you to enable front the USB devices to wake the

system from S4/S5.

Auto Power On

Auto Power On Mode

Allows you to set the computer to turn on automatically every

day or on a preselected date. This option can be configured

only if the Auto Power On mode is set to Enabled Everyday or

Selected Day.

Auto Power On Date

Allows you to set the date on which the computer must turn on

automatically. This option can be configured only if the Auto

Power On mode is set to Enabled 1 to 31.

Auto Power On Time

Allows you to set the time at which the computer must turn on

automatically. This option can be configured only if the Auto

Power On mode is set to Enabled hh:mm:ss.

105

Содержание Alienware Aurora R8


















































































































Результаты поиска

Содержание Alienware Aurora R8

Отзывы:

Похожие инструкции для Alienware Aurora R8

Бренды по названию

Популярные бренды

Dell Alienware Aurora R8, Руководство по обслуживанию

Результаты поиска

Содержание Alienware Aurora R8

Отзывы:

Похожие инструкции для Alienware Aurora R8

Бренды по названию

Популярные бренды