manualshive.com logo in svg

Dell Alienware 17, Руководство по обслуживанию

Поделиться
Скачать
Dell Alienware 17 Скачать руководство пользователя страница 148

Exit

Save Changes and Reset

Allows you to exit the BIOS setup 
program and save your changes.

Discard Changes and Reset

Allows you to exit the BIOS setup 
program and load previous values for all 
BIOS setup program options.

Restore Defaults

Allows you to restore default values for 
all BIOS setup program options.

Discard Changes

Allows you to load previous values for all 
BIOS setup program options.

Save Changes

Allows you to save the changes for all 
BIOS setup program options.

Boot sequence

This feature allows you to change the sequence of devices that your computer 
attempts to boot from. If the computer cannot boot from the device you select, it 
attempts to boot from the next bootable device. You can use this feature to change 
the:

• Current Boot Sequence — change the boot sequence for the current boot, for 

example, to boot from the optical drive to run Alienware Diagnostics from the 

Drivers and Utilities disc or to reinstall your operating system using an external 

media. The previous boot sequence is restored at the next boot.

• Future Boot Sequence — change the boot sequence for all future boots, for 

example, to boot from the primary hard drive.

Boot options

NOTE: 

The following boot options are available only when the Boot List Option is 

set to Legacy.

Floppy (Diskette Drive) — The computer attempts to boot from the floppy disk 
drive. If no operating system is on the drive, the computer generates an error 
message.

Hard Drive — The computer attempts to boot from the primary hard drive. If no 
operating system is on the drive, the computer generates an error message.

BIOS setup program

148

Содержание Alienware 17


























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды