manualshive.com logo in svg

Dell Alienware 17, Руководство по обслуживанию

Поделиться
Скачать
Dell Alienware 17 Скачать руководство пользователя страница 144

Main

Memory Speed

Displays the memory speed.

Advanced

Intel(R) SpeedStep (TM)

Allows you to disable or enable Intel (R) 
SpeedStep Technology.

NOTE: 

If enabled, the processor 

clock speed and core voltage are 
adjusted dynamically based on the 
processor load.

Default: Enabled

Virtualization

Allows you to disable or enable the Intel 
Virtualization technology. Default: Enabled

VT for Direct I/O

Allows you to disable or enable a Virtual 
Machine Monitor (VMM) to use the 
additional hardware capabilities provided 
by Intel(R) Virtualization Technology for 
Direct I/O. Default: Enabled

Integrated NIC

Allows you to disable or enable the on-
board LAN controller. Default: Enabled

USB Emulation

Allows you to enable or disable the USB 
emulation feature. This feature defines 
how the BIOS, in the absence of a USB-
aware operating system, handles USB 
devices. USB emulation is always enabled 
during POST. Default: Enabled

NOTE: 

You cannot boot any type of 

USB device (floppy, hard drive, or 
memory key) when this option is 
disabled.

USB PowerShare

Allows you to charge USB devices when the 
computer is turned off or in standby mode. 
Default: Enabled

USB Wake Support

Allows you to enable USB devices to wake 
the computer from standby or to disable 
the USB wake support feature. Default: 
Disabled

BIOS setup program

144

Содержание Alienware 17


























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды