Dell 5WC10, Инструкция по установке и обслуживанию

Страница: 44 / 166

Option Description
System Service
Tag Specifies the system Service Tag.
System
Manufacturer Specifies the name of the system manufacturer.
System
Manufacturer
Contact
Information Specifies the contact information of the system manufacturer.
System CPLD
Version Specifies the current version of the system complex programmable logic device (CPLD) firmware.
UEFI Compliance
Version Specifies the UEFI compliance level of the system firmware.
Memory Settings
You can use the Memory Settings screen to view all the memory settings and enable or disable specific memory functions,
such as system memory testing and node interleaving.
Viewing Memory Settings
To view the Memory Settings screen, perform the following steps:
Steps
1. Power on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If the operating system begins to load before you press F2, wait for the system to finish booting, and then
restart the system and try again.
3. On the System Setup Main Menu screen, click System BIOS .
4. On the System BIOS screen, click Memory Settings .
Memory Settings details
About this task
The Memory Settings screen details are explained as follows:
Option Description
System Memory
Size Specifies the memory size in the system.
System Memory
Type Specifies the type of memory that is installed in the system.
System Memory
Speed Specifies the system memory speed.
System Memory
Voltage Specifies the system memory voltage.
Video Memory Specifies the amount of video memory.
44 Pre-operating system management applications