4
Install the
.
5
install the
6
Follow the procedure in
After working inside your computer
.
IO board
Removing the IO board
1
Follow the procedure in
Before working inside your computer
.
2
Remove the
3
Remove the
4
Remove the
5
To remove the I/O board:
a Remove the two screws (M2x4) that secure the wireless-antenna bracket to the I/O board [1].
b Using a plastic scribe, disconnect the antenna cables from the I/O board [2].
c Remove the three screws (M2x4) that secure the Type-C USB bracket to the I/O board [3].
d Using a plastic scribe, disconnect the speaker cable from the I/O board [4].
e Disconnect the LED and microphone cable from the I/O board [5].
32
Removing and installing components
