Dell 48 Port Gigabit Ethernet Switch, Руководство пользователя

Страница: 68 / 402

68
Configuring PowerConnect 3424/P and 3448/P
www
.dell.com | support.dell.com
NOTE:
When creating a user name, the default priority is 1, which allows access but not configuration
rights. A priority of 15 must be set to enable access and configuration rights to the device. Although user
names can be assigned privilege level 15 without a password, it is recommended to always assign a
password. If there is no specified password, privileged users can access the Web interface with
any password.
NOTE:
Passwords can be secured by using password management commands to force aging-out of
passwords, or expiration of passwords. For more information, see "Security Management and Password
Configuration".
Configuring an Initial Terminal Password
To configure an initial terminal password, enter the following commands:
console(config)#
aaa authentication login default
line
console(config)# aaa authentication enable default line
console(config)# line console
console(config-line)# login authentication default
console(config-line)# enable authentication default
console(config-line)# password george
• When initially logging on to a device through a terminal session, enter
george
at the
password prompt.
• When changing a device’s mode to enable, enter
george
at the password prompt.
Configuring an Initial Telnet Password
To configure an initial Telnet password, enter the following commands:
console(config)# aaa authentication login default line
console(config)# aaa authentication enable default line
console(config)# line telnet
console(config-line)# login authentication default
console(config-line)# enable authentication default
console(config-line)# password bob
• When initially logging onto a device through a Telnet session, enter
bob
at the
password prompt.
• When changing a device mode to enable, enter
bob
.