Dell 2161DS-2, Инструкция по установке и эксплуатации

Страница: 32 / 56

32 Basic Operations
www
.d
e
ll.c
o
m
| s
u
p
p
o
rt
.d
e
ll
.c
o
m
To set or change the password:
NOTE:
If you lose or forget your password, please contact Dell Technical Support. See Appendix C:
Technical Support for contact information.
1
Click and press <Enter> or double-click in the
New
text box.
2
Type the new password in the New text box and press <Enter>.
Passwords must contain both alpha and numeric characters, are case sensitive and may be
up to 12 characters long. Legal characters are: A to Z, a to z, 0 to 9, space and hyphen.
3
In the Repeat box, type the password again and press <Enter>.
4
Click OK to change only your password, and then close the dialog box.
To password protect your console:
1
Set your password as described in the previous procedure.
2
Select Enable Screen Saver .
3
Type the number of minutes for Inactivity Time (from 1 to 99) to delay activation of
password protection and the screen saver feature.
4
For Mode, select Energy if your monitor is E
NERGY
S
TAR®
compliant; otherwise select
Screen .
CAUTION:
Monitor damage can result from the use of Energy mode with monitors not compliant with
Energy Star®.
5
(Optional) Click Test to activate the screen saver test, which lasts 10 seconds then returns
you to the Security dialog box.
6
Click OK .
To log in to your console:
1
Press any key or move the mouse.
2
The Password dialog box displays. Type your password, then click OK .
3
The Main dialog box displays if the password was entered properly.
To remove password protection from your console:
1
From the Main dialog box, click Setup - Security ; the Password dialog box displays. Type
your password, then click OK .
2
In the Security dialog box, click and press <Enter> or double-click in the New box. Leave
the box blank. Press <Enter>.
3
Click and press <Enter> or double-click in the Repeat box. Leave the box blank.
Press <Enter>.
4
Click OK to eliminate your password.