manualshive.com logo in svg

Dell 1955, Руководство владельца оборудования

Поделиться
Скачать
Dell 1955 Скачать руководство пользователя страница 128

128

Getting Help

www.euro.dell.com 

(Europe only)

www.dell.com/la 

(Latin American countries)

www.dell.ca 

(Canada only)

•

Anonymous file transfer protocol (FTP)

ftp.dell.com/

Log in as 

user:anonymous

, and use your e-mail address as your password. 

•

Electronic Support Service

[email protected]

[email protected] (Asian/Pacific countries only)

support.jp.dell.com 

(Japan only)

support.euro.dell.com

 (Europe only)

•

Electronic Quote Service

[email protected] (Asian/Pacific countries only)

[email protected] (Canada only)

AutoTech Service

Dell's automated technical support service—AutoTech—provides recorded answers to the questions most 
frequently asked by Dell customers about their portable and desktop computer systems. 

When you call AutoTech, use your touch-tone telephone to select the subjects that correspond to your 
questions.

The AutoTech service is available 24 hours a day, 7 days a week. You can also access this service through the 
technical support service. See the contact information for your region.

Automated Order-Status Service

To check on the status of any Dell™ products that you have ordered, you can go to 

support.dell.com

, or you 

can call the automated order-status service. A recording prompts you for the information needed to locate 
and report on your order. See the contact information for your region.

Technical Support Service

Dell's technical support service is available 24 hours a day, 7 days a week, to answer your questions about 
Dell hardware. Our technical support staff use computer-based diagnostics to provide fast, accurate answers. 

To contact Dell's technical support service, see "Before You Call" on page 129 and then see the contact 
information for your region.

Содержание 1955

































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды