Dell 1350CNW Скачать руководство пользователя страница 114

Страница: 114 / 328

110

Dell Printer Configuration Web Tool

The

Dell Printer Configuration Web Tool

feature also allows you to change

the printer settings and keep track of printing trends. If you are a network

administrator, you can copy the printer settings to one or all printers on the

network using your web browser.
To launch the

Dell Printer Configuration Web Tool

, enter the IP address of

your printer in your web browser.
If you do not know the IP address of your printer, print the printer settings

page, or display the

TCP/IP Settings

page, which lists the IP address.

The Operator Panel

Press the

(Menu)

button.

Ensure that

Report/List

appears, and then press the button.

Ensure that

Printer Setting

appears, and then press the button.

The printer settings page is printed.

Confirm the IP address next to

IP Address

under

Network

on the printer

settings page.
If the IP address is

0.0.0.0

, wait for a few minutes to resolve the IP

address automatically, and then print the printer settings page again.
If the IP address is not resolved automatically, see "Assigning an IP Address

(for IPv4 mode)" on page 39.

The Tool Box

NOTE:

When the printer is connected to the USB port, TCP/IP Settings cannot be

displayed.

NOTE:

Click

Start



All Programs



Dell Printers



Dell 1350cnw Color

Printer



Tool Box

NOTE:

When multiple printer drivers are installed on your computer, the

Select Printer window appears. In this case, click the name of Dell 1350cnw

Color Printer listed in Printer Name, and then click OK.

The

Tool Box

opens.

Click the

Printer Setting Report

tab.

Select

TCP/IP Settings

from the list at the left side of the page.

Downloaded from ManualsPrinter.com Manuals

Содержание 1350CNW









































































































































































































































































































































Результаты поиска

Содержание 1350CNW

Отзывы:

Dell 1350CNW, Руководство пользователя, Страница: 114 / 328

Результаты поиска

Содержание 1350CNW

Отзывы: