Dell EMC PowerEdge T140, Руководство по обслуживанию

Страница: 69 / 108

NOTE: Ensure that the processor and the bracket are placed in the tray after you remove the heat sink.
Figure 39. Removing the processor
Next step
1 Replace the processor .
Installing the processor
Prerequisites
CAUTION: Never remove the heat sink from a processor unless you intend to replace the processor. The heat sink is necessary to
maintain proper thermal conditions.
1 Ensure that you follow the Safety instructions .
2 Follow the procedure that is listed in Before working inside your system .
3 Remove the processor .
Steps
1 Align the pin 1 indicator of the processor with the triangle on the socket and place the processor on the socket.
CAUTION: Positioning the processor incorrectly can permanently damage the system board or the processor. Be careful not
to bend the pins in the socket.
2 Lower the socket lever and push it under the tab to lock it.
3 If the processor has previously been used in a system, remove any remaining thermal grease from the processor by using a lint-free
cloth.
4 Use the thermal grease syringe included with your processor kit to apply the grease in a quadrilateral design on the top of the
processor.
CAUTION: Applying too much thermal grease can result in excess grease coming in contact with and contaminating the
processor socket.
NOTE: The thermal grease syringe is intended for single use only. Dispose the syringe after you use it.
Installing and removing system components 69