system board, you must supply the recovery key when you restart your system or program before you can access the
encrypted data on your drives.
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
Before working inside your system
.
3. Remove the following components:
a.
b.
c.
d.
e.
f.
g.
h.
Internal USB card (if installed)
i.
j.
k. Disconnect all cables from the system board.
CAUTION:
Take care not to damage the system identification button while removing the system board from the
system.
Steps
1. Using the system board holder and plunger, slide the system board towards the front of the system.
2. Lift the system board out of the chassis.
Figure 94. Removing the system board
Next steps
1.
116
Installing and removing system components
