Installing the optional front bezel
Prerequisites
1. Follow the safety guidelines listed in the
NOTE:
The bezel key is part of the bezel package.
Steps
1. Align and insert the tabs on the bezel into the slots on the chassis.
2. Press the bezel until the release button clicks in place.
3. Lock the bezel.
Figure 14. Installing the optional front bezel
System cover
Removing the system cover
Prerequisites
1. Follow the safety guidelines listed in the
2. Power off the system, including any attached peripherals.
3. Disconnect the system from the electrical outlet and peripherals.
Steps
1. Use a 1/4 inch flat head or a Phillips #2 screwdriver to turn the lock counterclockwise to the unlock position.
2. Open the release latch until the system cover slides back.
3. Lift the cover from the system.
40
PowerEdge R340 installing and removing system components
