Dell EMC Latitude 7520 Скачать руководство пользователя страница 78

Страница: 78 / 96

Table 4. System setup options—Integrated Devices menu (continued)

Integrated Devices

Disable USB4 PCIE Tunneling

Disable the USB4 PCIE Tunneling option.

By default, the option is disabled.

Video/Power only on Type-C Ports

Enable or disable the Type-C port functionality to video or only power.

By default, the

Video/Power only on Type-C Ports

option is disabled.

Type-C Dock Override

Enables to use connected Type-C Dell Dock to provide data stream with
external USB ports disabled. When Type-C Dock override is enabled, the
Video/Audio/Lan submenu is activated.

By default, the

Type-C Dock Override

option is enabled.

Video

Enable or disable the usage of video on Dell Dock external ports.

By default, the

Video

option is disabled.

Audio

Enable or disable the usage of audio on Dell Dock external ports.

By default, the

Audio

option is enabled.

Lan

Enable or disable the usage of LAN on Dell Dock external ports.

By default, the

Lan

option is enabled.

Miscellaneous Devices

Enable or disable Fingerprint Reader device.

By default, the

Enable Fingerprint Reader Device

option is enabled.

Unobtrusive Mode

Enable Unobtrusive Mode

Enable or disable all the system light and sound.

By default, the

Enable Unobtrusive Mode

option is disabled.

Table 5. System setup options—Storage menu

Storage

SATA/NVMe Operation

Set the operating mode of the integrated storage device controller.

By default, the

RAID On

option is enabled.

Storage interface

Port Enablement

This page allows you to enable the onboard drives.

By default, the

M.2 PCIe SSD

option is enabled.

SMART Reporting

Enable SMART Reporting

Enable or disable Self-Monitoring, Analysis, and Reporting Technology
(SMART) during system startup.

By default, the

Enable SMART Reporting

option is not enabled.

Drive Information

M.2 PCIe SSD

Type

Displays the M.2 PCIe SSD type information of the system.

Device

Displays the M.2 PCIe SSD device information of the system.

Enable MediaCard

Secure Digital (SD) Card

Enable or disable the SD card.

By default, the

Secure Digital (SD) Card

option is enabled.

Secure Digital (SD) Card Read-Only Mode Enable or disable the SD card read-only mode.

System setup

Содержание Latitude 7520

































































































Результаты поиска

Содержание Latitude 7520

Отзывы:

Похожие инструкции для Latitude 7520

Бренды по названию

Популярные бренды

Dell EMC Latitude 7520, Руководство по обслуживанию

Результаты поиска

Содержание Latitude 7520

Отзывы:

Похожие инструкции для Latitude 7520

Бренды по названию

Популярные бренды