Hardware replacement overview
Some hardware components of the Integrated Data Protection Appliance (IDPA) can
be replaced without shutting down the system, and some hardware components
require a system shutdown to replace.
The target audience for this document is Customer Support Services and partner
personnel who are responsible for replacing IDPA components in the field.
The following table lists the IDPA components and whether it is required that they be
shut down while being replaced. To replace one of these components, go to the
required replacement procedure.
Table 1 IDPA component replacement shutdown requirements
Model
Component
shutdown is not
required
Component
shutdown is
required
Data Domain DD6300/DD6800/DD9300
l
2.5" disk drive
l
3.5" disk drive
l
Power supply
l
Chassis
l
DIMM
l
Fan
l
I/O module
l
NVRAM module
l
Rails
l
Storage
processor (SP)
module
Data Domain DD9800
l
2.5" solid state
drive
l
Fan
l
Power supply
l
Chassis
l
DIMM
l
I/O module
l
Management
module
l
NVRAM module
l
Rails
l
SP module
Data Domain DS60
l
3.5" disk drive
l
Bezel (shelf and
cable
management
assembly)
l
Fan
l
Link control card
(LCC)
l
Power supply
l
Cable
management
assembly
l
Chassis
l
Rails (shelf and
cable
management
assembly)
Prepare the Integrated Data Protection Appliance for Hardware Replacement
DELL EMC CONFIDENTIAL
12
Integrated Data Protection Appliance (IDPA)
2.1
Field Replacement Guide
