manualshive.com logo in svg

Dell EMC DP4400, Процедуры обслуживания

Поделиться
Скачать
Dell EMC DP4400 Скачать руководство пользователя страница 70

Figure 56 Slide the system into the cabinet

Connect the I/O cables and power cords

This procedure is used to connect the peripherals and power to the system.

Procedure

1. Using the connection information recorded on the labels, connect the I/O cables to the

system.

2. Plug the power cords into the power supplies.

Verifying successful NIC replacement from the ACM

After the NIC is replaced and power has been re-applied, you can run the FRU command line
verification from the ACM to ensure that the replacement was successful.

Procedure

1. From the ACM, type the following command: 

# showfru network

The screen displays that the system is collecting data. When the data collection is
completed, the screen displays status information for ports the NIC.

acme-dp4400-ACM:~ # showfru network

Collecting Data............

______________________________________________________________________________

| Name            | Port| Link Status| Model Name                             |

|=============================================================================|

| NIC Integrated 1| 1   | Up         | Ethernet 10G 4P X710 SFP+ rNDC         |

| NIC Integrated 1| 2   | Up         | Ethernet 10G X710 rNDC                 |

| NIC Integrated 1| 3   | Down       | Ethernet 10G X710 rNDC                 |

| NIC Integrated 1| 4   | Down       | Ethernet 10G X710 rNDC                 |

| NIC Slot 1      | 1   | Down       | Ethernet Converged Network Adapter X710|

| NIC Slot 1      | 2   | Down       | Ethernet Converged Network Adapter X710|

| NIC Slot 1      | 3   | Down       | Ethernet Converged Network Adapter X710|

| NIC Slot 1      | 4   | Up         | Ethernet Converged Network Adapter X710|

| NIC Slot 2      | 1   | Up         | Gigabit 2P I350-t Adapter              |

Remove and replace assemblies

70

Dell EMC Integrated Data Protection Appliance DP4400 Service Procedures

Содержание DP4400

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды