background image

SensorScope and DigitalDuster System

The safest and most effective system for cleaning your digital SLR 
image sensor.

Table of Contents

Getting Started....................................................................1
Product Contents.................................................................3
Understanding Your SensorScope System........................4
Before You Get Started........................................................7
Getting Started....................................................................8
Frequently Asked Questions.............................................12
Appendix............................................................................14

 

Introduction.........................................................................1
Product Contents.................................................................3

Understanding Your SensorScope System........................4

Before You Clean..................................................................7

Cleaning Your Sensor...........................................................8

Frequently Asked Questions.............................................12

Appendix............................................................................14

Содержание DigitalDuster






























Отзывы: