Deliberant DLB2300 Скачать руководство пользователя страница 7

Страница: 7 / 71

PC is not in the same subnet as the device is.

Knowing the Network Application

DLB2300/DLB2310/DLB2319 can act as the following roles, and it supports
WDS (Wireless Distribution System) function.

Access

Point

WDS

(Wireless

Repeater)

Bridge/Router

WISP

Client

The device provides 3 different operation modes and the wireless radio of device can

act as AP/Client/WDS. The operation mode is about the communication mechanism

between the wired Ethernet NIC and wireless NIC, the following is the types of

operation mode.

Router

The wired Ethernet (WAN) port is used to connect with ADSL/Cable modem and the

wireless NIC is used for your private WLAN. The NAT is existed between the 2 NIC

and all the wireless clients share the same public IP address through the WAN port to

ISP. The default IP configuration for WAN port is static IP. You can access the web

server of device through the default WAN IP address 172.1.1.1 and modify the

setting base on your ISP requirement.

Bridge

The wired Ethernet and wireless NIC are bridged together. Once the mode is selected,

all the WAN related functions will be disabled.

WISP (Wireless ISP)

This mode can let you access the AP of your wireless ISP and share the same public

IP address form your ISP to the PCs connecting with the wired Ethernet port of the

device. To use this mode, first you must set the wireless radio to be client mode and

connect to the AP of your ISP then you can configure the WAN IP configuration to

meet your ISP requirement.

The wireless radio of the device acts as the following roles.

AP (Access Point)

The wireless radio of device serves as communications “hub” for wireless clients and

provides a connection to a wired LAN.

Содержание DLB2300








































































Результаты поиска

Содержание DLB2300

Отзывы:

Похожие инструкции для DLB2300

Бренды по названию

Популярные бренды

Deliberant DLB2300, Руководство пользователя

Результаты поиска

Содержание DLB2300

Отзывы:

Похожие инструкции для DLB2300

Бренды по названию

Популярные бренды