Deliberant DLB2300, Руководство пользователя

Страница: 31 / 71

30
can be useful in areas where many client devices are associating with the device,
or in areas where the clients are far apart and can detect only the device and not
each other. You can enter a setting ranging from 0 to 2347 bytes.
Data Rate
The standard IEEE 802.11b/11g supports 1, 2, 5.5, 11 / 6, 9, 12, 18, 24, 36, 48
and 54 Mbps data rates. You can choose the rate that the device uses for data
transmission. The default value is “auto”. The device will use the highest possible
selected transmission rate.
Beacon Interval
The beacon interval is the amount of time between access point beacons in
mini-seconds. The default beacon interval is 100.
Broadcast SSID
Broadcasting the SSID will let your wireless clients find the device automatically.
If you are building a public Wireless Network, disable this function can provide
better security. Every wireless stations located within the coverage of the device
must connect this device by manually configure the SSID in your client settings.
Int. Roaming
This function will let Wireless Stations roam among a network environment with
multiple devices. Wireless Stations are able to switch from one device to another
as they move between the coverage areas. Users can have more wireless
working range. An example as the following figure
You should comply with the following instructions to roam among the wireless
coverage areas.
Note For implementing the roaming function, the setting MUST comply the
following two items.
z All the devices must be in the same subnet network and the SSID must
be the same.
z
If you use the 802.1x authentication, you need to have the user profile in
these devices for the roaming station.
Ethernet
Wireless Station moves
between the coverage areas
DEV1 DEV2
Block WLAN Relay (Isolate Client)
The device supports isolation function. If you are building a public Wireless