Delfin ElastiMeter, Руководство пользователя

Страница: 6 / 19

ElastiMeter User Manual version 1.6
15.8.2018
5
O
PERATING INSTRUCTIONS
1. Switch the power on by pressing the yellow operating button. The
message
WAIT
is displayed.
o
The ElastiMeter is ready to measure when the message
READY
is displayed with a short tone.
2. Place the probe perpendicularly, slightly and shortly on the skin, only
for about 0.5 seconds.
o
The indenter touches the skin first, then the base plate.
o
The indenter imposes a constant deformation when the base
plate is in full contact with the skin.
o
The force sensors recognize the skin contact and the
measurement starts automatically.
o
If necessary, support your hand to get a proper contact.
o
If the measurement was correctly performed, the message
“
MEASURE sample 2/5
” is displayed.
o
If the measurement was not correctly done, the message
USER
ERROR
is displayed and the following messages alter.
Base plate
Indenter
Skin