Delem DA-65W, Справочное руководство, Страница: 44 / 150

V0606, 2.24
• Machine/Tool selection
At each bend you can select one of the tools or machine shapes which are present in your
library. The displayed number is the number of the tool and machine part which is presently
selected.
Entering a new number will select another tool or machine part which will be drawn directly
on the screen.
With the "enter" key you can toggle between punch-, die-, machine upper- and lower part num-
ber.
It is also possible to turn the punch and die with respect to the machine shapes. To achieve this,
the tool number must be programmed negative.
2.aa
In order to get a graphical overview of the available tools while you are in the bend sequence
menu, press the function key 'show library' (S2). If pressed, an overview appears of available
tools.
Which type of tools is shown depends on which type was prompted in the bend sequence
screen: punch, die, machine upper- or lowerside.
• Turn indication
In the lower left corner a bend turn indication is displayed at each bend of bend sequence.