Delem DA-65W, Справочное руководство, Страница: 22 / 150

V0606, 2.2
The "±" key prompts a "-" character and the "." key prompts a "/" character in the drawing
number.
If 3D is available on the control, it is first required to confirm whether the drawing program-
ming will be effectuated in 2D or 3D. 3D drawing is explained in chapter 3.
After finishing this input you have to enter specific product data. Then you can start drawing
the product.
In the edit mode you also have the possibility to make a copy of the active product. A special
function key ‘copy product’ appears.
2.b
When the function key ‘edit notes’ has been pressed, a new window appears in which you can
edit the text about the current product. See the chapter ‘Data preparation/Data Edit’ for more
Function keys
copy prod-
uct Copy the current product. When pressed, you must enter
a new product number for the new copy.
draw. nr. Go to the screen with product number and drawing num-
ber, in order to edit the drawing number.
edit notes Open a window with notes about the current product.