Delachaux Conductix-Wampfler 1900 Series, Руководство пользователя

Страница: 7 / 20

7
iom 1900 / 2400 dual hose reel manual P/n 962101 2008.10.24 rev. 2
2.0 Installation
2.2.1 standard mounting
2.2.1.1 The reel is mounted by bolting the base to any flat surface which is structurally sound enough
to support it and the forces of winding and unwinding the hose.
2.2.1.2 The spool drum must rotate on a horizontal axis. Use a level to confirm this.
2.2.1.3 The reel should be oriented so that the hose extends perpendicular to the rotation of
the spool. The total hose deflection should not exceed 15
O
to either side of the guide.
Installations without a roller guide have no tolerance for deflection.
2.2.1.4 If deflection is constant to either side of the reel and operation is impaired, re-mount the
reel.
2.2.1.5 A Pivot Base should be used if the angle of deflection is not constant and exceeds 15
O
to
either side. Otherwise, excessive hose wear and unreliable operation will result.
2.2.1.6 A safety chain should be used for all overhead installations.
2.2.2 Pivot Base mounting
2.2.2.1 All 1900 & 2400 Series Dual Hose Reels can be furnished
with an optional pivot base to allow the reel to rotate and
keep the extended hose perpendicular to the application.
See table below for appropriate selection.
2.2.2.2 Pivot bases rotate up to 345
O
.
2.2.2.3 A Pivot base is required in carousel or loop-track
applications.
2.2.2.4 When a pivot base is used, the reel must be mounted
horizontally (“ceiling” or “floor” mounted).
2.2.2.5 The roller guide should be mounted to require the hose to
travel perpendicular to the axis of pivot base rotation. This
will guard against hose twisting and ensure effective swivel
action from the pivot base.
Spool Width
5.0
8.0
Pivot Base
40274A
40274C
Hose Deflection with Guide.
30
O
2.2 mounting