Delachaux Conductix-Wampfler 1900 Series, Руководство пользователя

Страница: 14 / 20

14
iom 1900 / 2400 dual hose reel manual P/n 962101 2008.10.24 rev. 2
5.0 Troubleshooting
Problem Possible Cause solution
Reel will not retract hose but has some tension
1) Improper pretension. 1) See tension adjustment Section 2.7
2) Incorrect reel for application (lift vs. stretch). 2) Quantify application vs. reel selection.
3) Improper hose or hose length installed. 3) Install hose for which reel is intended.
4) Roller “hose” guide adjustment. 4) Check guide alignment
5) Ratchet is installed in constant tension
application.
5) Remove Ratchet
Reel does not have spring tension
1) Broken spring (Quantify application to
prevent reoccurrence.)
1) Replace spring.
Reel will not engage 1) Broken ratchet pawl spring. 1) Replace pawl spring.
Reel will not disengage 1) Over-extension of reel.
1) Manually rotate reel spool to disengage
ratchet. Do not overextend or adjust guide
to prevent lockup when reel is overextended.
2) Readjust ball stop if applicable.
Hose improperly wraps on reel (wraps above or
jumps flange).
1) Improper hose or hose length installed 1) Install hose for which reel was intended.
2) Hose guide adjustment 2) Check & adjust guide alignment.
Hose twisting or knotting.
1) Improperly installed hose. 1) See hose installation section of IOM)
2) Hose rubbing on or bending around fixed
object.
2) Check roller guide for function and hose pay
out path.
3) Excessive spring tension. 3) Quantify application vs. reel selection.
4) Inadequate anchoring of hose.
4) Adjust anchoring method. i.e. add strain
relief (kelloms grip).
System leaks, looses or does not transfer fluids/
gas.
1) Faulty hose or connections.
Inspect and repair or replace
2) Worn swivel joint