IMPORTANT SAFETY INSTRUCTIONS
When installing and operating the Spa Eclipse ozone generator, basic
precautions should always be followed:
READ AND FOLLOW ALL INSTRUCTIONS
• Read this manual completely before attempting installation.
• All permanent electrical connections should be made by a qualified
electrician.
• Follow all applicable electrical codes.
• Be sure the electrical power is shut OFF at the main circuit breaker
before installing the Spa Eclipse.
• If the Spa Eclipse electrical connection is to be attached to the
spa controls, be sure the spa controls are protected by a Ground
Fault Circuit Interrupter (G.F.C.I.). If the Spa Eclipse is connected to
an independent electrical supply, then a G.F.C.I. must be installed
between the Spa Eclipse and the electrical supply.
• WARNING - To reduce the risk of electrical shock, if the power cord
is damaged, replace the entire unit immediately.
• The Spa Eclipse must be mounted indoors or sheltered, under a cover,
from natural elements (rain, sun, sprinklers).
• Mount the Spa Eclipse so that it is inaccessible to anyone in the spa.
• Install a check valve in the tubing between the Spa Eclipse and the
vacuum source.
• Plastic ozone supply tubing is available with the Spa Eclipse. Never
replace this tubing with metal tubing.
• Do not operate the Spa Eclipse unless sufficient air flow is being
drawn through the unit.
• WARNING: Short term inhalation of high concentrations of ozone and
long term inhalations of low concentrations of ozone can cause
harmful
physiological effects. Do not inhale ozone gas produced by this
device.
SAVE THESE INSTRUCTIONS!
