Del Morino ROTEX-L, Руководство по эксплуатации и обслуживанию

Страница: 11 / 27

11
c) To check the oil in the transmission, operate as follows:
1. With the machine on level unscrew the plug "B" and check that oil touches lower hole rim.
2. If the level is ok, lock the plug "B".
3. If the level is low, fill oil.
4. When the level is ok, lock the plug “B”.
d) To replace oil in the transmission, operate as follows:
1. Unscrew the plug “B”, turn backward the machine and drain completely oil.
2. Introduce the new oil through the hole “B” up to oil touches lower hole rim.
3. When level is ok, lock the plug “B”.
4. TOOLS REPLACEMENT
a) To replace the tools, operate as follows:
1. Unscrews the two screws "A" which lock the tools to replace.
2. Take out the two screws and remove the tool “B”.
3. Place the new tool and the two screws “A”.
4. Lock the screws "A" with pneumatic wrench.
5. Repeat this operation for all the tools to replace.
ATTENTION: each rotor is equipped with a couple of right and left tools according to the position, don’t
invert the right tools with the left ones.