Del Morino RES, Руководство по эксплуатации и обслуживанию

Страница: 3 / 39

3
DESCRIPTION
D
ESCRIPTION OF THE MACHINE
The back hoes type RES are machines applicable to the rear lifter of agricultural tractors.
The machine is composed with a jointed arm with a bucket mounted at its end. The arm is jointed with a
frame where there are the hand drive and the operator seat. The arm can rotate about 170° and can shift
respect to the frame. All the arms and bucket movement are hydraulic driven. The shifting movement of the
arm respect to the frame is manual with screw locking on RES15-20 and hydraulic locking on RES30-50.
The machine has an independent hydraulic plant driven by a pump connected with a multiplier to the reap
PTO of the tractor.
U
SE OF THE MACHINE
The back hoe type RES is light, handy and easy to use then is suitable to satisfy the requirement of small
and medium factory and hobby workers that need to make digging out or material moving not too heavy.
M
ACHINE LIMITS
 Maximum tractor hors power: 90 Hp depending from the model.
 Minimum ratio between Tractor / RES weight – 4:1
S
TANDARD EQUIPMENT
-
RES10: 250 mm bucket.
- RES15: 250 mm bucket.
- RES20: 300 mm bucket.
-
RES30: 350 mm bucket.
-
RES50: 400 mm bucket.
- RES15: shifting lock with screw.
- RES20: shifting lock with screw.
-
RES30: shifting lock with hydraulic cylinder.
-
RES50: shifting lock with hydraulic cylinder.
- Hydraulic pump with multiplier.
V
ARIANTS & OPTIONS
-
Bucket from 250 to 400 mm.
-
Tractor lifter locking kit.
- Shifting lock with hydraulic cylinder : RES15-20.