12
M
ULTIPLIER OIL LEVEL- MULTIPLIER OIL SUBSTITUTION
To refill or substitute the oil use only OIL SAE 140 EP, multiplier capacity: 0,28 l.
Refilling or replacement of oil must be made at the intervals prescribed in diagram “A”.
a) To verify oil level in the multiplier operate as follows:
1)
Put the multiplier in vertical position then verify oil level through the spy “B”.
2)
If the level is low, remove the plug “A” and refill with proper oil type. Use only new oil.
3)
When the level is correct replace and tighten plug “A”.
b) To substitute oil in the multiplier operate as follows:
1)
Remove the plug “A”.
2)
Put a container under the multiplier then remove the discharge plug “C”.
3)
When the multiplier is empty replace and tighten the discharge plug “C”.
4)
Fill oil through plug “A”.
5)
When the level is correct replace the plug “A”.
Содержание RES
