Removing and Replacing Handset on Locking Base
To remove handset from the Locking Base pull firmly from the bottom of the
handset. When replacing the handset set the top of the handset on the base and
push the bottom firmly into place.
Place Outside Call
Lift handset and listen for a dial tone (The handset should automatically come Off
Hook). If the handset is already removed from the locking base but is not currently
connected to an outside call then press the
HOOK
button and listen for a dial tone.
Dial telephone number. (Refer to the Operations Instructions of your telephone
system or Network Provider for information on phone number format
Answering Incoming Call
Lift handset. (The handset should come Off Hook. Start conversation.) If the handset is already removed
from the locking base but is not currently connected to an outside call (Off Hook), then press the
HOOK
button
to connect to the incoming call.
End Call
Replace handset on base, or, press
HOOK
button. .
Deklin Technologies, Inc.
2008
6
