BARCODE READER
REPLACEMENT PROCEDURES
Chapter Issue 3 Jan 08
Technical Reference Manual
26.7
Fitting the
Handheld Barcode
Reader
1. Select
Shut Down
and switch the mains isolator to
OFF
.
2. Gain access to the 4 port USB hub behind the front panel.
3. Connect the handheld barcode reader to the spare USB port on the hub.
4. If a 2D handheld barcode reader is being used, connect the dc power
connector (located near the 4 port USB hub) to the moulded connector on
the cable of the handheld barcode reader.
5. Refit the front cover ensuring that the cable is routed between the MMI
monitor bracket and the front cover.
6. Power up the machine.
7. Select
Maintenance
.
8. Select
Machine Setup
.
9. Select
Barcodes
.
10. Select
Handheld Barcode HW
.
Shut Down
USB Connector
dc Connector
Maintenance
Machine
Setup
Barcodes
Handheld Barcode HW
Not Fitted
