BARCODE READER
REPLACEMENT PROCEDURES
26.6
Technical Reference Manual
Chapter Issue 3 Jan 08
13. Select
Remote Barcode HW
.
14. Select
Fitted
.
15. Select
Accept
.
16. Select
Start Character
.
17. Set the start character for the barcode.
18. Select
Accept
.
19. Select
Name Length
.
20. Set the name length for the barcode.
21. Select
Accept
.
NOTE
The barcode setup is shown in code format. The code format for a barcode
of length 14 starting at character 4 would be:
###PPPPPPPPPPPPPP###
22. Select
Back
.
23. Select
Back
.
24. Select
Back
.
25. Use the documentation supplied with the reader to setup the Remote
Barcode Reader for the product to be used.
Remote Barcode HW
Not Fitted
Fitted
Accept
Start Character
1
Accept
Name Length
32
Accept
Back
Back
Back
