DESIGNER’S HANDBOOK 4189350049C EN
Page 85 of 206
The digital dimmer uses both inputs as an input pair, making it possible to change the dimmer level up or down by
activating the input by a connected push-button contact.
The function has 2 modes:
A. Dimmer up/down, input 1 up and input 2 down.
B. Dimmer up/down, but with colour shift when input 1 and 2 are activated simultaneously.
5.7.4.1 Connection of 2 push-button dimmer controls (Mode A or B):
This connection can be used in both dimmer modes.
Mode A: Dim up/down. Day/night colour shift can be automatic at a defined dimmer level.
Mode B: Dim up/down and make a colour shift by a simultaneous push on both push-buttons.
5.7.4.2 Connection of 3 push-button dimmer/colour controls (Mode B):
This configuration is used for digital dimmer mode B, where there are 3 push-buttons for: Up, Down and Colour
shift.
5.7.5
Relay outputs
The relay function makes it possible to design customised virtual indicators with a warning or control function.
The two relay outputs can be individually configured to serve the functions described in this chapter.
