DM-4 Gas/Hydro
Application Notes, PCM TCP/IP port (WebArm)
DEIF A/S
Page 3 of 10
1. About this document
General purpose
This document continues the application notes for DEIF’s Delomatic 4, DM-4, used in GAS or
HYDRO applications.
The general purpose of the application notes is to offer the designer information about TCP/IP
setup.
Intended users
The document is mainly intended for the person responsible for designing DM-4 systems. In
most cases, this would be a panel builder designer. Naturally, other users might also find useful
information in this document.
Contents/overall structure
The document is divided into chapters, and in order to make the structure of the document
simple and easy to use, each chapter will begin from the top of a new page.
Please make sure to read this handbook before working with the DM-4
controller and the gen-set to be controlled. Failure to do this could result in
damage to the equipment or human injury.
For functional descriptions, the procedure for parameter setup, complete
standard parameter lists, etc., please see the Installation Instructions.
