AL8-2 – Programming manual
4189320003D
Page 10/19
SELECTION OF OUTPUT RELAY (OUTPUT(S) A AND/OR OUTPUT B)
The LEDs for "OUTPUT A", "OUTPUT B" indicate the actual function as follows:
NOTE:
Both LEDs are lit simultaneously.
EITHER:
RED
OUTPUT
A
FUNCTION:
RED
OUTPUT
B
No output relays are
activated on alarm
OR:
GREEN
OUTPUT A
FUNCTION:
RED
OUTPUT B
Output relay A is activated
on alarm
OR:
RED
OUTPUT
A FUNCTION:
GREEN
OUTPUT B
Output relay B is activated
on alarm
OR:
GREEN
OUTPUT A
FUNCTION:
GREEN
OUTPUT B
Both output relays A and B
are activated on alarm
Pressing the FUNCTION SELECT push-button will cause a change from the actual LED
indication/function to the next in the order, and so the
FUNCTION SELECT
push-button
is pressed, till the requested function is indicated by the LEDs. The requested function is
entered into the programme memory by pressing the
ENTER
push-button.
Pressing ENTER results in the next function in the order being automatically pointed to:
Inhibit function.
INHIBIT OF INCOMING ALARM (INHIBIT)
The "INHIBIT" LED indicates the actual function as follows:
EITHER:
RED
INHIBIT FUNCTION:
Inhibit function is NOT
active for this input
channel
OR:
GREEN
INHIBIT
FUNCTION:
Inhibit function is active for
this input channel
Pressing
FUNCTION SELECT
causes a change from one
function to the other. When the required function is indicated,
enter this into the programme memory by pressing
ENTER
.
Pressing ENTER results in the next function in the order being
automatically pointed to: Alarm on cable failure.
