1
10
0
Panic™ mode
If you are threatened in or near your vehicle, you can press
for 1.5 seconds to trigger Panic Mode on your security
system and attract attention. The siren will sound and the
parking lights will flash for 30 seconds. To stop Panic Mode
at any time, press
. Also, pressing and holding the
button will activate the Panic Mode.
Silent™ mode
Use the remote-controlled silent arm/disarm to temporarily
turn off the arm or disarm chirps by briefly pressing
before
pressing
.
The confirmation chirp(s) will
then be eliminated for that one operation only. To permanently
turn off the arm and disarm chirps, contact your installation
dealer.
Valet® mode
Valet® Mode prevents your security system from arming and
triggering either automatically or with the remote transmitter.
In Valet® Mode, the system will not arm, but all convenience
functions (door locks, trunk release, etc.) remain operational.
This feature is useful when washing or servicing your vehicle.
➜
NOTE:
The warn away response to lighter impacts is bypassed if
the system is armed using the silent arm/disarm. This ensures that
the siren does not chirp in an environment where you do not want
chirps to be emitted. The system is still capable of being triggered
by heavier impacts; only the warn away response generated by
light impacts is bypassed.
➜
➜
©
2004 Directed Electronics, Inc.
