11
© 2 0 0 1 d i r e c t e d e l e c t r o n i c s , i n c .
3. Release the
button as soon as the parking lights flash.
(In gasoline vehicles, the engine will start 3 seconds after
the parking lights flash. In diesel vehicles, the engine will
start when the wait-to-start indicator on the vehicle's dash
goes out.)
4. Once the vehicle has started, it will run for the pre-program-
med period of time (either 12, 24, or 60 minutes - see
Programming Options section of this guide) or until a shut-
down input is triggered.
When you are ready to drive the vehicle:
1. Insert the ignition key and turn
it to the ON (not the START)
position.
2. Press the brake pedal.
shutting down the remote start system
While the vehicle is running during remote engine starting oper-
ation, the system will monitor the vehicle and will automatically
shut down the engine if the system receives any of the following
shut-down inputs:
➤
➤
The brake pedal is pressed.
➤
➤
The hood is opened.
➜
note:
If the brake pedal is pressed before the key is in the
ON position, the engine will shut down.