QUICK REFERENCE GUIDE:
To arm using your remote
■
Press
for less than a second. When armed the siren chirps once
and the parking lights flash once.
Arming
■
Press
of your transmitter for one second. When the system arms,
you will hear a short chirp, and see the parking lights flash once. If
the vehicle’s power door locks are controlled by the system, the doors
will lock.
Arming while driving
■
Press
on your transmitter for two seconds while the vehicle is
running. The system will chirp once and then once more to indicate
that the ignition is on.
Disarming
■
Press
. You will hear two chirps, and the parking lights will flash
twice. If the power locks are controlled by the system, the doors will
unlock.
Disarming without a transmitter
■
Turn on the ignition. Press the Valet switch within 15 seconds. The
system should now disarm; if it does not, you may have waited too
long. Turn the ignition off and on and try again.
Silent Mode
■
Press
briefly before arming or disarming, and the confirmation
chirp(s) will be eliminated for that one operation only.
Panic Mode
■
Press
for 1.5 seconds, and you will enter Panic Mode. The siren
will sound and the parking lights will flash for 30 seconds.
To enter or exit Valet
®
Mode with the Valet switch
■
Turn the ignition to "run" position, then turn to "off" position. Press
and release the Valet switch within 10 seconds. The status LED will
light steady if you have entered Valet Mode, and it will go out if you
exited Valet Mode.
Using Remote Valet as you enter or exit the vehicle
■
Open any door. Press
. Press
. Press
again. The status LED
will light steady if you have entered Valet Mode, and it will go out if
you have exited Valet Mode.
Cut along dotted line and f
old f
o
r a quick and eas
y
r
efer
ence to k
eep in y
our pur
se or w
allet.
✂
✂
