8
©
2002 Directed Electronics, Inc.
Your system includes a High Security Disarm feature. During the
triggered sequence, using the transmitter to disarm the system
will only stop the triggered sequence (the siren will stop and the
parking lights will stop flashing). However, the system will remain
armed and the doors will stay locked. This is extremely useful if
you must stop the system from sounding, but are unable to visu-
ally check the vehicle. The trigger will stop, but the vehicle will
remain protected.
To disarm with the transmitter during a trigger, press
on your
transmitter. The siren will stop sounding. Next press
once
more and the system will chirp four or five times (reporting the
trigger) and disarm.
This feature allows you to disarm the system without the trans-
mitter should it be lost, damaged or disabled. In order to disarm
without a transmitter, you must have the vehicle's ignition key and
know where the Valet switch is located. Be sure to check with the
installer for the location of the Valet switch.
Turn on the ignition. Press the
Valet switch within 15 seconds. The
system should now disarm. If it
does not, you may have waited too
long, so turn the ignition off and
on and try again.
DRW-35
Disarming Without a Transmitter
High Security Disarm
