4
Dehaco B.V. • Kruisbaak 25 • 2165 AJ Lisserbroek (NL) •
✆
+31 (0)88 - 20 20 600 •
[email protected] • www.dehaco.nl
1. INTRODUCTION
Thank you for purchasing this new decontamination
shower. This decontamination shower is intended
for decontaminating people or small materials. This
model was designed for a safe and comfortable air
flow and is also ready for connecting a bypass to the
contaminated room.
2. CONTENTS OF THE SET
Quantity Product
1
Shower/contaminated chamber
1
Clean chamber
1
Shower basin
1
Shower fittings
10
Spacers
3. BASIC INFORMATION
The decontamination shower should be assembled
on a flat surface.
In order to erect the decontamination shower you
open the zip door. In each chamber there are spacers
(Figure 1) that can be placed on the cams on the
inside, at the top and bottom. In the shower chamber
the spacers are only placed at the top because of the
shower basin that must be placed there.
Figure 1 Position the spacers
The decontamination shower consists of two
parts. The clean room section and the shower/
contaminated room section. You can have these in a
straight or L-shaped set-up. The two sections can be
linked using Velcro.
NB
If putting up the decontamination shower on the
work site, then the ventilation openings will need
to point towards the area where the work is being
performed.
The shower/contaminated room section has
replaceable openings. A flap (Figure 2) or a tarpaulin
(Figure 3) can be attached to them. These are easy to
reposition and should be installed in such a way that
the air flow always heads in the direction of the area
where the work is being performed.
Figure 2 Flap
Figure 3 Tarpaulin