Degometal GO 248, Руководство по эксплуатации

Страница: 8 / 40

-
8
-
3.2.2 Safety instructions
- The battery should be removed from the tool during prolonged storage or if it will not used for a
long period of time.
- Never attempt to charge a damaged battery.
- Never place a dirty or wet battery in the charger.
- Never dispose of batteries with household waste or in fire or water.
- Do not charge the battery if the ambient temperature is below 0 °C or above 45 °C.
3.2.3 Safety instructions charger
- Make sure the charger and power supply are undamaged.
- Always use the original power supply intended for this tool.
- Never use the charger in a humid or wet environment or near combustible materials or gases.
Failure to comply with these instructions may result in explosions.
4. Maintenance and service
4.1 Maintenance
Maintenance of this tool is limited to removal of the jaw assembly:
- Remove the battery.
- Unscrew the nosepiece and front sleeve.
Unscrew the clamping sleeve and remove the 3-jaw set.
Note that this also releases the jaw pusher and pusher spring.
During intensive use, also regularly clean the front sleeve.
- Clean and lubricate the parts or replace them when worn out.
- Replace everything in reverse order and make sure all parts are screwed firmly in place.
Empty the mandrel collector regularly.
4.2 Service
In order to keep the tool in good condition, regular maintenance and replacement of worn parts are
recommended. Service is available and provided by the point of sale.