PAGE
4
OF 8
Permanent installation
Important information for the user.
This appliance may only be installed by a registered LP Gas installer.
All registered installers
are issued with a card carrying their registration number. Ask to be shown this card before allow-
ing the installation work to commence and make note of the Installer QCC number. Upon
completion of the installation, the installer is required to explain the operational details of the ap-
pliance together with the completion certificate. Pay particular attention to the operation of the
isolation or shut-off valve in the gas supply line to the appliance. You should sign for acceptance
of the installation when the installation is completed to your satisfaction. Note that your invoice is
required in the event that you wish to make a guarantee claim.
Important information for the installer
Pl
ease refer to installation instructions in this leaflet and in the operating manual supplied.
This appliance may only be installed by a registered LP Gas installer registered with the Liq-
uefied Petroleum Gas Association of Southern Africa.
The appliance must be installed in accordance with the requirements of SANS 10087-1 and any
fire department regulations and/or local bylaws applicable to the area. If in doubt check with the
relevant authority before undertaking the installation. Upon completion of the installation you are
required to fully explain and demonstrate to the user the operational details and safety practices
applicable to the appliance and the installation.
When the installation is completed, please print your details below.
Name
……………………………………….
Company
……………………………………….
Registration number
……………………………………….
Telephone number
……………………………………….
Caution:
Never use a naked flame to check for gas leaks
Check for gas leaks after installation and whenever a new or re-filled gas bottle is used for
the first time.
Ensure that the control knobs on the hob are in the OFF position.
Open the valve on the Gas bottle.
Using a small paint brush, apply some soapy water to all the connections.
If there is a leak, bubbles will appear.
If this happens, close the valve on the gas bottle.
Check and tighten the connections immediately.
Repeat the procedure to ensure that there are no further leaks.
Maintenance and servicing
Service intervals.
Every twelve months the stove should be serviced by a Defy Service agent to ensure continued effi-
cient and safe operation.
Note: If required, the cleaning of the valves should only be carried out by a qualified Defy technician.
i.e. Burner not functioning correctly.
Removable burner parts should be washed weekly with hot water and detergent.
Take care to remove any encrustations and ensure that the burner holes are clear.
The gas hose and valve condition should be inspected for leaks every time the gas bottle is re-filled.
