background image

TROUBLE SHOOTING - Continued 

 

The machine will not work at all. 
Check:  

• 

House fuses or circuit breakers. 

• 

Wall socket ( plug in another appliance to check ) 

• 

That the door is closed properly. 

• 

That the water tap is open. 

• 

That a programme has been selected. 

• 

That the ON/ Off button has been pressed in. 

• 

That the indicator light is on. 

 

The machine does not drain or spin. 
Check:  

• 

That the drain hose is not kinked or obstructed. 

• 

That the outlet pipe or sink is not blocked. 

 

The machine does not fill with water. 
Check:  

• 

That the water tap is open. 

• 

That the drain hose end is at least 400 mm. above floor level. 

• 

That the inlet hose is not kinked.  

• 

That there is a water supply to the tap. 

 

The machine vibrates or is excessively noisy. 
Check:  

• 

Whether anything has fallen between the wall and the machine. 

• 

That the machine stands level and that the feet are locked. 

• 

That the transport brackets and all packaging has been removed. 

• 

That there is a clearance of at least 50 mm. at the back of the machine. 

• 

That the laundry is evenly distributed in the drum. 

• 

That the wash load is balanced. (equally distributed round the drum) 

 

The door will not open 
Check:  

• 

That the machine is switched off at the ON/OFF switch. 

• 

That the safety lock has disengaged (wait at least two minutes) 

 

The machine leaks water 
Check: 

 

• 

That the inlet and outlet hoses are secured. 

• 

That the pump filter is securely screwed in. 

 
 
 
 

Содержание AUTOMAID SM















Отзывы: