Page 18
6. Troubleshooting
Oven emits steam when it is in use.
It is normal that steam escapes during
operation
>>> This is not a fault.
The appliance emits metal noises while heating and cooling.
When the metal parts are heated, they may
expand and cause noise.
>>> This is not a fault.
The appliance does not operate.
The mains fuse is defective or has tripped.
Check fuses in the fuse box. If necessary,
replace or reset them.
The appliance is not plugged into the wall
socket.
>>> Check the plug connection.
Oven light does not work.
Oven lamp is defective.
>>> Replace oven lamp.
Power is cut.
>>> Check if there is power. Check the fuses
in the fuse box. If necessary, replace or reset
the fuses.
Oven does not heat.
Function and/or Temperature are not set.
>>> Set the function and the temperature with
the Function and/or Temperature knob/key.
If you have followed the instructions and still have a problem, contact the nearest
Defy Technical Support Centre. They will be able to advise you on any aspect of
the product or send a qualified technician to repair it. Never attempt to repair a
defective appliance yourself.
Remember that you may be charged for a service call even during the warranty
period if the fault is due to or caused by any of the above.
Owner’s responsibility
Since the following are not factory faults, they are the owner’s responsibility.
x
Damage to exterior finish.
x
Breakage of glass and other components.
x
Replacement of the light bulb.
x
Damage through improper use or installation of the appliance.
x
Damage caused by moving the appliance
.
